Filter By:
- Parts & Accessories (150)
- Hitch-Mount (54)
- Pickup/RV/Spare-Tire Mount (22)
- Roof-Mount (94)
- Trunk-Mount (15)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Car Racks
$180.00
The EVOC TAILGATE PAD is our pickup pad for safe bike transport on your pickup-truck for up to 6 bikes. It combines secure bike fixation and tailboard damage protection in one piece. Made from durable 600 weight Denier, we added a polyurethane coating to make it resistant for the weather that you'll inevitably encounter while you're out shredding. The updated Tailgate pad is equipped with molded foam separations blocks and straps to keep your toys from touching.
We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad.
It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame.
Features
- Padded pickup tailgate protection
- Ideal for shuttling bikes - particularly MTBs
- Quick access to tailgate release handle
- Fold-Away flap for rear camera (Olive/Black and Black/Olive only)
Specifications
- Weight: 1850 g (Size M/L), 2300 g (Size XL)
- Material: P 600/D PU coated, Tarpaulin
- Black/Olive & Olive/Black Sizes: M/L- 136 x 85 x 2 cm , XL 160 x 100 x 2 cm
- Colors: Black/White, Black/Olive, Olive/Black
Sizes
Two sizes are available (M/L & L/XL). Use the M/L for trucks like the Toyota Tacoma, Nissan Frontier, Chevrolet Canyon, Ford Ranger and other compact trucks. Use the L/XL for full-size trucks like the Toyota Tundra, Nissan Titan, Chevrolet Silverado, Ford-F150, Dodge Ram, etc.
$225.00 - $255.00
- Holds and covers up to 6 bikes to protect them as well as the tailgate from scratches and damages during bike transport
- Padding is cut-resistant, water resistant and UV-stable
- Non-slip protection (padded)
- Quick-access tailgate release
- Soft lining on the truck side of the pad, won't damage paint
- Size: full-size truck (XL) or mid-size truck (ML)
- Specifically designed for pickup trucks with curved tailgates
- ML, Fits tailgates 130cm/50'' wide
- XL, Fits tailgates 160cm/60'' wide
$5.99
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
$10.99
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core.
Product Specs:
- Weight: 0.02 lbs.
- Limited Lifetime Warranty
$11.99
Safety and wheel straps for Joe Pro series strap racks. Includes one each.
$13.99
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.
$14.99
Hardware for ShowBoat 66.
Includes:
- 2 end caps
- 1 stop collar
- 1 set screw
- 1 hex wrench
$19.99
End caps for 86" Cross Bars. Includes four end caps
Please note these end caps are specific to the 86" cross bar.
$19.99
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
$20.99
Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp.
- Includes 2 FatStraps to carry one fat bike
- Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"
$26.99
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.
$28.99
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks.
- Includes two straps
- Weight: 0.44 lbs.
- Dimensions: L 15.50 in x W 1.00 in x H 18 in
$29.99
Body for HitchLock. Requires SKS lock core. (Sold Separately)
- Weight: 1.00 lb
$38.99
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately.
- Lock rack accessories to your vehicle's crossbar
- Use with bike, boat, and BasketCase accessories
- SKS Lock Cores sold separately
Product Specs:
- Weight: 0.20 lbs.
- Dimensions: L 4.00 in x W 3.25 in x H 1.00 in
- Limited Lifetime Warranty
$39.99
Lock housing for Q Towers. Includes 4 lock housings. SKS lock cores not included (sold separately).
$42.99
Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements
Product Details:
- Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately).
- Structural steel brackets with powder-coat finish for durability and resistance to the elements.
- The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed).
- Only compatible with Yakima SkyLine and TimberLine towers.
- Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle.
Product Specs:
- Weight: 0.50 lbs
- Some assembly required, 60 minute install
$43.99
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market.
- Includes T-slot hardware, covers, and install tool.
- Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts.
- Compatible with Yakima JetStream bars and most other T-slot style crossbars.
Product Specs:
- Weight: 0.25 lbs.
- Dimensions: L 2.75 in x W 1.50 in x H 0.50 in
- Limited Lifetime Warranty
$44.99
The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered.
Product Details:
- Hanging storage hooks for the SkyRise tent keep your camping gear organized
- Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities
- Yakima carbine attachment hook is secure, strong, and easy to use
- Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear
- Sold as a pack of four
Product Specs:
- Weight: 0.48 lbs
- Dimensions: L 6.00" x W 1.60" x H 0.50"
$44.99
Fat bikes fit fine with long wheel straps to accommodate fat bikes on StageTwo and StageTwo +2.
- Includes 2 FatStraps to carry two fat bikes?
- Fits tires sizes up to 20x 4.0", 26" x 5.0" and 27.5x 4.5"
$49.99
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
$49.99
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad.
PRODUCT DETAILS
- Foam padding protects boats and other cargo from damage
- Durable, ballistic nylon construction
- Look and loop closures and 28” length perfectly fit around the LongArm crossbar
- Center cutout allows side or centered placement on crossbar
- Sold as a single pad
TECHNICAL SPECS
- Weight: 0.50 lbs
- Dimensions: L 28.00in x W 3.00in x H 3.00in
$49.99 - $69.99
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
$49.99
Yakima's Rattler Wheel Straps are replacement wheel straps. They install to your tray easily and have a ratcheting closure for security.
$49.99
Why let loading and unloading take a toll on your gear and rack systems? Our new, extra-thick Wear Strip is a raised rubber strip designed to protect equipment and T-slot crossbars. Sold in trim-to-fit pairs, the Wear Strips install easily and help keep out debris.
Product Details:
- Durable rubber strip protects gear and crossbars from the wear-and-tear of loading
- 76" length can be easily trimmed to fit any bar width
- Compatible with Yakima HD Bar and JetStream Crossbars
- Set of two
Product Specs:
- Weight: 0.50 lbs
- Dimensions: L 76.00in x W 1.12in x H 0.33in
- Fully assembled
$54.99
Yakima's Hood Anchor creates a secure attachment point at your hatch, trunk or hood for bow and stern tie downs. Sold in pairs, they’re highway-speed strong, coated to protect your vehicle’s paint job, and super easy to use - just drop them in place.
Product Details
- Creates a secure attachment point for bow and stern tie downs
- Fits easily under a hood, hatch or trunk
- Installation is simple - just drop them in place
- Durable coated strap protects your vehicle's paint
- Sold as a pair Technical Specs
- Weight: 0.43 lbs
- Dimensions: L 6.50in x W 2.00in x H 10.12in
$54.99 - $84.99
If it floats and fits on crossbars, these Crossbar Pads will help protect it.
- Goes great with kayak stackers, heavy-duty straps, and strapthang
Page 1 of 12
Next page