Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Components

3T Extension End Plugs
$9.99
End-plugs with opening for cable pass-through for aerobar extensions.
3T Arx II Team Bolts Kit
$49.99
Set of 5 Torx bolts for faceplate and steerer clamp, for Arx II stems.
3T DiffLock Caps for Oval Rails 10x7
$54.99
Clamp caps and bolts for Ionic and Palladio seatposts – fit oval saddle rails 7 mm x 10 mm.
3T DiffLock Caps for Round Rails
$54.99
Clamp caps and bolts for DiffLock clamp in Ionic and Palladio seatposts – fit round saddle rails 7mm.
3T Straight Extensions Pro
$74.99
3T's Straight Aero Extensions are made of durable, stiff aluminum and feature no bends for an ultra low position during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Vola/Revo Team/LTD Clamp Kit
$94.99
Pair extension clamps and fixings for Vola Ltd and Vola Team.
3T Arx II Pro
$99.99 - $104.99
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)
3T Arx II Team Stem
$99.99 - $131.99
3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate. - Aluminum stem with 40mm stack height - Single M6 bolt clamps stem to fork steerer - T25 bolts on bar clamp - 120 grams for 110mm - Bar Clamp Diameter: 31.8 mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Weight: 120 grams (110mm)
3T Brezza II Riser Kit - 10/20mm
$104.99
Riser kit comprises risers (2 x 10mm, 2 x 20mm), conversion plates, and bolts for Brezza II, to adjust armrest and extension height by 10mm, 20mm, or 30mm. - Material: Alloy - Bolts: Steel
3T Vola Pro Clamp Kit
$144.99
Replacement clamp kit for Vola PRO and Clip on Pro/Team aerobars.
3T Zero25 Pro
$149.99
Zero25 is a lightweight, universal seatpost with a twist: it's two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that's needed is to flip the clamps from one side of the seatpost head to the other and the offset changes. No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use—it now takes 30 seconds to transform your seatpost. And, the best news is that, despite the double functionality, the Zero25 is even lighter than our previous seatpost. Zero25 Pro has an alloy pillar and is 350mm long.
3T Straight Extensions Team
$152.99
3T's Straight Aero Extensions are made of light, stiff carbon and feature no bends for an ultra low position during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Comfort Cradles and Pads Kit - Carbon
$162.99
Comfort armrest set comprises pads and cradles and was original equipment on Ventus, use to upgrade Aura, Brezza II Team, and Mistral.
3T Compact Cradles and Pads Kit - Carbon
$162.99
Compact armrest set comprises pads and cradles for Aura, Brezza II Team, Mistral, and Ventus.
3T S-Bend Extensions Team
$170.99
3T's S-Bend Aero Extensions are made of light, stiff carbon and feature ergonomic bends to keep your wrists comfortable during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Wrist Comfort Bend Extensions Team
$170.99
3T's Wrist Comfort Bend Aero Extensions are made of light, stiff carbon and feature large ergonomic bends to keep your wrists as comfortable as possible and ensure a sturdy grip during your time against the clock. - Standard 22.2-mm diameter - 305mm maximum extension from center line of bar clamp
3T Zero25 Team Stealth
$212.99
Zero25 is a lightweight, universal seatpost with a twist: it's two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that's needed is to flip the clamps from one side of the seatpost head to the other and the offset changes. No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use—it now takes 30 seconds to transform your seatpost. And, the best news is that, despite the double functionality, the Zero25 is even lighter than our previous seatpost. Zero25 can handle any type of seatpost rails, including round rails and oval-shaped carbon rails.
3T Arx LTD
$354.99 - $374.99
Arx, Latin for stronghold and bridge, is 3T’s race-proven design for the perfect connection between fork and handlebar and suited to all cycling disciplines. Clamp design is optimized to ensure a secure fit on composite steerers and bars without the need for potentially damaging high torque values during assembly. 3T inhouse tests show Arx’s clamp by far exceeds the CEN standard, and also that it works very well with other brands of handlebar. Arx Ltd is the carbon-fiber version of the stem, with Ti bolts. Super-light and super-stiff, it is a highly evolved, modern design weighing just 118g.
3T Vola LTD
$999.99
Everyone's biometrics are different; no two cyclists should conform to the same TT set up. Comfort (we're talking about power-production) combined with aerodynamics, yields speed. You need the combined forces of both, and to do so you need to find your optimal position, which is why 3T designed their Vola LTD cockpit to be highly adjustable, not to mention light, stiff, and aero. - Narrow, aero-optimized base bars are built with 3T's HM carbon, cutting weight by huge margins - The super-low aero position favored by time trial specialists is possible with extension clamps mounted on the underside of the base bar - Arm pad stack height above the stem center line ranges from 30mm in the low position, to 97mm using all the included spacers in the top-mounted position - Width between the arm pads ranges 220—340mm, measured at pad outer edge - Arm pad reach can be set 20—70 mm ahead of the basebar center, measured at pad front edge - The arm pads rotate in their clamps -A reinforcing bridge is included for rigid, shake-free set-up, that can also double as a convenient computer clamp - Carbon aero extensions - Carbon base bars - Carbon 3T Comfort Cradles with neoprene pads - Weight: 750 grams in the "low position" - UCI legal
45NRTH XL Concave Carbide Aluminum Studs (100 pack)
$64.99
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Sold in a pack of 100 - XL Stud features a larger carbide tip diameter for increased traction
45NRTH Dillinger 4 (Custom Studdable)
$115.00
Riding your fatbike on ice just got even better with the redesigned Dillinger tread pattern and tubeless compatibility. Creating your own stud pattern allows you to rail icy off-camber singletrack with confidence and control, while taller side lugs bring improved cornering in snowy conditions. Dillinger’s center tread is tightly spaced for speed when you need it so you can power up an icy climb and rip down the other side as the studs claw into the slick surface. - Custom studdable up to 240 studs
45NRTH Kahva 29-inch
$126.99
From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with steel carbide studs as well as single, double, and triple-siped lugs.   - Siping on center and side lugs allows them to conform to terrain better for increased grip in any riding conditions - Steel carbide studs provide traction in the iciest conditions - Directional lugs provide low rolling resistance while offering excellent braking traction
45NRTH Dillinger 5 26-inch
$158.99 - $312.99
The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability
45NRTH Dillinger 4 - 27.5 Studded Fatbike Tire
$215.00 - $295.00
Riding your fat bike on ice just got even better with the redesigned Dillinger tread pattern and tubeless compatibility. 252 carefully positioned studs allow you to rail icy off-camber singletrack with confidence and control, while taller side lugs bring improved cornering in snowy conditions. Dillinger's center tread is tightly spaced for speed when you need it so you can power up an icy climb and rip down the other side as the studs claw into the slick surface.
45NRTH Dillinger 4
$239.00 - $312.99
Riding your fatbike on ice just got even better with the redesigned Dillinger tread pattern and tubeless compatibility. 240 carefully positioned studs allow you to rail icy off-camber singletrack with confidence and control, while taller side lugs bring improved cornering in snowy conditions. Dillinger’s center tread is tightly spaced for speed when you need it so you can power up an icy climb and rip down the other side as the studs claw into the slick surface.
49°N Universal Schrader Valve Core
$1.99
Fits all standard Schrader valves.
49°N Road Brake Pads
$4.99
- Molded road brake pads - 50mm pad length
49°N V-Brake Pads 55mm
$5.79
Threaded post with hardware - 55mm pad length
49°N Standard Innertube (0.9mm) Schrader Valve
$5.99 - $14.99
Our standard butyl innertube with a 0.9mm wall thickness represents excellent value-for-money and strikes a nice balance between weight and durability. - S/V Schrader Valve (American Valve) with a 40mm valve length for trouble-free double wall rim compatibility - 12 and 14 tubes use angled/shorter valves for improved pump head clearance/accessibility - Easily identifiable from the GREEN color-coded box - Automated hot-feed extrusion with hydraulic press-cured vulcanization for consistent, high-quality, reliable construction - All tubes are inflated and stored for 24hrs to check for leaks/defects prior to being packaged - Low-lead nickel-plated valve with standard removable Schrader valve core - Packaged individually (carton/box)
49°N Foam Comfort Grip
$6.49
Soft & comfortable foam rubber - Contoured to fit the hand comfortably
Page 1 of 73 Next page