Parts & Accessories

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr

Crank left arm, Blaze Powerspline, 175mm, pitch black

The new Gen 3 single-sided Stages Power L meter for Cannondale Si Stages Power meter is built on to a non-drive-side Cannondale Si crank arm and is compatible with existing Cannondale Hollowgram Si crank models - 2014 or newer and Hollowgram SiSL2 cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

- Shimano, FC-MT500 Crank Arm, Crank Arm, 170mm, Hollowtech II, Black, Y1VB98030

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact. - For Descendant Carbon and non-Eagle XX1 and X01

SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum

With the conception of our Cane Creek eeWings Titanium crank set we cut no corners, and our CNC-machined preload assembly is no exception. The Cane Creek Crank Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. We are so proud of this piece of jewelry that we decided to design it to fit onto other 30mm crank spindles from SRAM and Raceface, and 28.99mm SRAM Dub Crank spindles. Lose the plastic preload on your crankset, add peace of mind. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles

- Lower slider replacement parts for E-13 chainguides

- Some do it to protect that beautiful finish on their cranks, and some do it because they can't stand stock crankarm graphics. - Whatever your reason for wrapping and protecting a crankset, we wanted to give you an option with our branding. - These are full-wrap Crankskins that work with most cranksets One pair

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 2.5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. - 5mm thick - 5 spacers per bag - Machined engineering-grade Delrin

The Wheels Manufacturing 386 EVO Adapter for 22/24mm Spindle Cranks adapts SRAM/Truvativ cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (1) - 24mm ID adapter (for right-side) - (1) - 22mm ID adapter (for left-side) - (8) - 0.7mm spacers

The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with Hollowtech II cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: Hollowtech II - BB/Frame Interface: PF30

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

- 8 bikes worth of adapters for Shimano 24mm and SRAM/Truvativ 24/22mm cranks to virtually any BB30 or Pressfit 30 frame, including mountain bikes, 2x10 systems, narrow-shell road bikes, road triples, etc. - 65 piece kit includes 4 each Shimano and SRAM adapter sets, plus extra spacers for chainline adjustment and a puller for removing adapters - Includes: (8) Shimano adapter (24mm ID, Shimano right or left; SRAM right only), (4) SRAM-left adapter (22mm ID, Shimano right or left; SRAM right only), (4) SRAM-right adapter (24mm ID, Shimano right or left; SRAM right only), (12) 0.7mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 1.8mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (4) 2.5mm spacer - right (24mm ID, Shimano right or left; SRAM right only), (8) 1.0mm spacer - left (30mm ID, SRAM), (4) 2.5mm spacer - left (30mm ID, SRAM), (4) 5mm spacer - left (30mm ID, SRAM), (4) 10mm spacer - left (30mm ID, SRAM), (8) wave washer, (1) removal tool for pulling adapter out of BB

The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr

Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

For chain consistency and control in technical situations, TruVativ teamed up with chain guide masters MRP to bring you the 2X10 X-Guide. It features an aluminum back plate and MRP's replaceable Skid Plate design so its amazingly lightweight, yet can take a beating. The lower guide, along with a sealed bearing pulley provides excellent chain retention in the roughest terrain.

- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation

- Crank Arm Length: 175mm - Interface: ISIS - Position: Left

- Crank Arm Length: 170mm - Interface: Power Spline - Position: Left