Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Rear

$1,112.00
The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors, and signals, improving speed in every way. - SRAM AXS-enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately
$1,097.00
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
$1,070.00
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The RED XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Ceramic - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$968.45
The Campagnolo Super Record EPS 12 speed rear derailleur offers improved shifting performance with a trajectory curve that is optimized for 11-29 and 11-32 cassettes. - Using 3D Embrace technology the inner mechanism embraces more teeth per sprocket thanks to the advanced position of the upper pulley - The 12-tooth pulley wheels allow for the integration of larger cassette range while keeping chain length the same - Upper body adjustments allow you to set the perfect position whether you're riding an 11-29 or 11-32 tooth cassette - An upper body return spring absorbs the energy of any bumps, preserving the hanger, and bringing the derailleur back to position - An aluminum upper body provides high resistance to impacts and greater stiffness - The lower part of the body is made of ultra-light technopolymer, reinforced with long carbon fibers Specifications: - Largest Cog: 32 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 37 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy Record/Super Record EPS - Drivetrain Speeds: 12 - Weight: 234g
$947.00
The XX Eagle T-Type AXS™ 12-Speed rear derailleur foundationally changes the relationship between cassette and derailleur. Engineered as integrated, interdependent transmission components, the T-Type derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. Its game-changing Full Mount attachment method creates a far stronger connection and grips both sides of the frame. This XX T-Type rear derailleur features the same intuitive pairing and set-up procedure as Eagle AXS™ derailleurs. - Tucked-in profile houses replaceable skid plates that enhances dependability in high-pressure racing environments - To further its performance, the lower pulley called "Magic Wheel" keeps spinning if an object becomes lodged - Features an overload clutch, accommodates common maintenance and features that real world riders really appreciate - Exceptional shifting performance and unprecedented strength - Aluminum cage - Battery Not Included
$947.00
The XX SL Eagle T-Type AXS™ 12-Speed rear derailleur foundationally changes the relationship between cassette and derailleur. Engineered as integrated, interdependent transmission components, the T-Type derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. Its game-changing Full Mount attachment method creates a far stronger connection and grips both sides of the frame. This XX SL T-Type rear derailleur features the same intuitive pairing and set-up procedure as Eagle AXS™ derailleurs. - Features an overload clutch and a tucked-in profile, removing all but what’s needed - Accommodates common maintenance and to further its race-day performance, comes with a lower pulley called "Magic Wheel" that keeps spinning if an object becomes lodged - Features a carbon cage, a replaceable outer link and b-knuckle cover for lightweight and easy maintenence - Battery Not Included
$939.99
- Ergonomic Shifting Operation Without Stress - Shimano Synchronized Shift - Low Profile Rear Derailleur Design - Shimano Shadow Rd - Race Endurance For Less Damage In Crush - Maintains Compact And Smooth Appearance - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T
$801.00
Whether on the starting line or not, the X0 Eagle T-Type 12-Speed rear derailleur brings competition-tested prowess to riders who let their riding prove everything. Engineered as integrated and interdependent transmission components, the X0 T-Type derailleur mounts around the wheel axle itself, contacting the cassette directly with a first-of-its-kind Hangerless Interface. This foundationally changes the entire relationship between cassette and derailleur. Beyond that, its Full Mount attachment method creates a far stronger connection that grips both sides of the frame. These X0 T-Type rear derailleur features the same intuitive pairing and set-up procedure as our Eagle AXS™ derailleurs - Competition proven strength and reliability - X0 Eagle derailleur is especially robust, allowing for common maintenance that serious riders demand - Features an overload clutch that boosts resiliency and a tucked-in profile that houses protection covers on the B-knuckle and outer link that are fully replaceable - Aluminum cage - Battery Not Included
$784.00
It's an all-new derailleur that's specifically designed and optimized to be motor-driven instead of cable-actuated. AXS powered components enable customization and scale to an individual rider's liking via the AXS App. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. The Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. In the event of an impact, the motor gearbox disengages, giving the derailleur freedom to move, and instantly returns back to its position for a seamless experience for the rider. The system is tested to IP69K water and dust proofing standard for creek crossings, mud splatterings and the resulting post-ride pressure washings. - Enduro focus and trail ready - Forged aluminum cage - Stainless hardware - Black/Polar colorways - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available.
$557.00
Riders want a derailleur that shifts on command, whether under climbing load or sprinting to the stage finish. The GX Eagle AXS derailleur gets it done with everything you have come to expect from our AXS connect components. The GX Eagle AXS derailleur is smart enough to protect itself thanks to its incredibly resilient Overload Clutch. Engineered with a variety of rider preferences in mind, it is compatible with our new expanded range 10-52t cassette as well as our 10-50t cassette. Showcasing its lineage from the proven GX Eagle mechanical line, the GX Eagle AXS derailleur is there for one thing: to do the job. Features - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - Overload Clutch protection - Finished with the GX Eagle master colorway - Battery sold separately Specifications - Speeds: 12 - Cage Material: Steel - Pulley Bearings Material: Steel - Max Tooth: 52
$549.00
One rear derailleur to rule them all. The SRAM Force eTap AXS rear derailleur is designed for both 1x and 2x systems. It capitalizes on X-Range gearing technology for enhanced range and chain management and features larger pulleys for improved durability and efficiency. Strong, smooth, quiet and AXS enabled. - SRAM AXS enabled, allowing easy personalization - Orbit chain management technology keeps the drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Larger X-SYNC pulleys for increased durability and efficiency - NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$457.00 - $485.00
It takes a degree of passion for the sport that can’t be faked to fully appreciate SRAM RED. It was created to blur the boundaries between machine and athlete. The SRAM RED rear derailleur was designed with Exact Actuation technology for precise, efficient shifting. Carbon fiber, titanium, and ceramic bearings complete the spec. The result adds to its legacy as the heart of the purest groupset for the pursuit of cycling excellence. - SRAM 11-speed compatible - WiFLi option - Carbon cages, carbon inner links, titanium hardware - Exact Actuation shifting provides fast and accurate shifts - Silent shifting with optimized AeroGlide pulleys, ceramic bearings - Spring-fixed barrel adjuster - Chain pulley cage adds precise chain management - Titanium pinch bolt keeps a low profile while minimizing weight - Speeds: 11 - Material: Carbon cages, Carbon inner links, Aero designed titanium hardware - Weight: 145 grams short cage), 165 grams (mid cage) - Compatibility: SRAM RED & Force Rear Shift-Brake levers, SRAM R2C Aero SL-1190 shifters, - SRAM R2C Aero SL-1150 shifters, SRAM 900 Aero brake levers, SRAM 500 Aero brake levers - Finish: Falcon grey & black anodized - Tech Highlights: AeroGlide Pulleys, Exact Actuation - Largest Cog (teeth): 28 (short cage) 32 (WiFli Medium Cage)
$471.00
With SRAM's WiFLi RED Rear Derailleur, SRAM set out to make their already race-proven design faster, quieter, and able to accommodate a full 11-32 cassette for a huge gear range. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Fast, quiet, and capable, the RED derailleur delivers!
$471.00
Occupying a new realm in shifting performance, the redesigned XX1 Eagle derailleur gives no-compromise racers and dream-bike builders a true top-tier option. The crisp, precise XX1 shifting feel athletes rely on now features an updated cage geometry for improved chain management. Occupying its rightful place at the top of the Eagle ecosystem, the XX1 Eagle rear derailleur makes full use of the new 10-52T cassettes and is backward-compatible with 10-50T cassettes, as well. - Updated cage geometry provides better chain retention and crisper shifting - Comes in XX1 Eagle master colorway as part of Eagle Colorsystem to go with all cassette and chain color options - Backward-compatible with 10-50T cassettes, works with new 10-52T cassettes
$467.00
This one takes all your trail dreams, from XC to enduro, all the way to eleven. SRAM's XX1 rear derailleur packs a massive amount of technology into its compact, lightweight body. It uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
$449.99
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience with shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain stabilizer. The RD-RX817 Di2 version offers the digital precision of Shimano electronic shifting, as well as synchronized shifting and is compatible with MTB cassettes with a max cog size of 42T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Compatible with current road Dual Control Levers - High cog: Max. 11T/Min. 11T - Low cog: Max. 42T/Min. 40T - Total capacity: 31T
$439.00
With SRAM's RED Rear Derailleur, SRAM set out to make their already race-proven design lighter, faster, and quieter. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Light, fast, and quiet, the RED derailleur delivers!
$404.99 - $409.99
Shimano Ultegra Di2 Shadow rear derailleur. - Sleek integrated appearance - New low-profile design - Shimano Shadow RD - Race endurance - Optimized slant angle - Maintain race concentration with more intuitive shift control - System communication with front derailleur - Shimano Synchronized Shift - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Average Weight: 242 grams (SS type), 249 grams (GS type)
$408.00
If your ride doesn't feel complete until you get a little dirt on your tires, you know the importance of capable components that can tackle anything. The Rival XPLR eTap AXS rear derailleur is a dedicated 1x-specific unit designed for use with the XPLR 10-44 cassette. It makes for an uncluttered drivetrain that takes on pavement and singletrack with equal aplomb. Wireless and proven eTap shift logic, AXS connectivity and advanced chain management mean this derailleur does exactly what you want when you need it. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - 1x specific for use with 10-44T XPLR and 10-36T cassettes - SRAM AXS enabled, allowing easy personalization - Chain management keeps the drivetrain quiet and secure - Large X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries - Cage Material (RD): Aluminum - Pulley Bearings Material: Steel - Max Tooth: 44 NOTE: Does not include eTap battery. Compatible with existing eTap batteries.
$408.00
On any surface you can imagine, in any drivetrain configuration, the Rival eTap AXS rear derailleur will handle it. Secure chain management and fast, precise shifting make for a smooth and quiet ride, every time. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - Compatible with both 1x and 2x drivetrains - 36T cog max derailleur works with 10-28T, 10-30T, 10-33T, and 10-36T cassettes - SRAM AXS-enabled, allowing easy personalization - Spring clutch keeps the drivetrain quiet and secure - X-SYNC pulleys for increased durability and efficiency - 36T max rear cog - Battery Not Included
$404.99
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience along with shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain stabilizer. The RD-RX815 Di2 version offers the digital precision of Shimano electronic shifting with synchronization and is compatible with road cassettes with a max cog size of 34T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Total capacity: 38T - Smooth and reliable mixed surface shifting - Compatible with current road Dual Control Lever - Maximum front difference: 17T - High cog: Max. 11T/Min. 11T - Low cog: Max. 34T/Min. 30T
$395.00
The 10-speed X-HORIZON rear derailleur makes shifting smooth and reliable no matter where you ride. Engineered to maintain consistent chain gap across all ten gears, X-HORIZON eliminates vertical movement for faster shifting, reduced shift force and an end to ghost shifting. ROLLER BEARING CLUTCH technology and the 12-tooth X-SYNC pulley wheels hold the chain in place, reducing bounce and chain slap. And CAGE LOCK technology makes wheel removal and installation easier than ever. Paired with the X0 10-speed shifter, X-HORIZON forms the backbone of EXACT ACTUATION technology—and that means completely smooth shifting action. - X-HORIZON technology provides more responsive shifting and eliminates ghost shifting, a common problem on DH bikes - Two cage lengths for various applications, including abnormally long chain stay growth - EXACT ACTUATION variant allows upgrades to existing bikes in the aftermarket - ROLLER BEARING CLUTCH with CAGE LOCK sets the industry standard - Aluminum outer cage - Weight: 257g (short cage), 263g (medium cage)
$395.00
The 7-speed X-HORIZON rear derailleur makes shifting smooth and reliable no matter where you ride. Engineered to maintain consistent chain gap across all seven gears, X-HORIZON eliminates vertical movement for faster shifting, reduced shift force, and an end to ghost shifting. Our new, Type-3 roller bearing clutch features a smoother torque curve for a quieter, more consistent operation and feel. The 12-tooth X-SYNC pulley wheel holds the chain in place, reducing bounce and chain slap. Additionally, CAGE LOCK technology makes wheel removal and installation easier than ever. Paired with the X01 DH 7-speed shifter, X-HORIZON forms the backbone of X-ACTUATION technology—and that means completely smooth shifting action. - Updated design of the rear derailleur incorporates our proven X-HORIZON design and new Type-3 roller bearing clutch technology - 12-tooth X-SYNC pulley wheels - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings
$379.45
The Campagnolo EKAR Rear Derailleur is designed for the 1x13-speed EKARndrivetrain with a gravel-orientated performance & build. - 2D parallelogram trajectory offers precise mechanical movement for 13 sprockets - High grade polymer pulley wheels (12T upper, 14T lower) allow for smooth chain running and secure retention - Carbon fiber-reinforced polyamide and anodized 7075 and 6082 alloys are lightweight, strong, and durable - Stainless steel bolts for strength and long-term resilience on gravel - Includes clutch lock for easy wheel removal Specifications: - Largest Cog: 44 - Rear Derailleur Mount Type: 10x1 Standard - Chain Wrap Capacity (teeth): 34 - Cage Length: Medium - Rear Der/Shifter Compatibility: Campy EKAR - Drivetrain Speeds: 13 - Weight: 275g
$369.99
The new TR12 rear derailleur is able to provide a quiet and accurate ride over the roughest trails. The key feature to this pursuit is the Hall Lock. During the Race season, lead mechanic for Intense Factory Racing, John Hall, noticed excessive movement around the B-knuckle when riding over rough rock gardens and in tracked out corners. This was leading to more chain skipping and slapping creating possible variances in shifting. This inspired John's idea to lock the B-knuckle to the bike's derailleur hanger. TRP engineers worked closely with Hall to create this feature, The Hall Lock. - Hall Lock - G-Spec Ratchet Clutch - G-Spec finishing touches - Carbon fiber cage & upper link - Extra-wide parallelogram pivot - Sealed cartridge bearing pulleys
$359.99 - $364.99
The RD-M9100 XTR rear derailleur is intended for use with 1x drivetrains. It is compatible with both 11- and 12-speed cassettes. - Decreased rear derailleur tension at low gear position, to prevent high chain tension - Added bumper at rear derailleur pulley cage - Bigger 13T pulley - Direct mount compatible - Compatible cassette size: 10-51 (12-speed), 10-45 (11-speed) - Total capacity: 35t (GS Medium Cage) / 41t (SGS Long Cage)
$353.00
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel. - A dedicated 1x rear derailleur - EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). - 10- and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - Cage Lock technology makes for fast wheel changes or chain installation - Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths Short Cage: Chain Wrap Capacity (teeth): 18 teeth Largest Cog: 28 Weight: 250 g Medium Cage: Chain Wrap Capacity (teeth): 26 teeth Largest Cog: 36 Weight: 262 g Long Cage: Chain Wrap Capacity (teeth): 32 teeth Largest Cog: 42 Weight: 271 g
$349.99
- Stable Shifting Performance - Pulley Follow-Up In Certain Distance - Shimano Shadow Rd Construction - Low Profile Rear Derailleur Design - Race Endurance For Less Damage In Crush - Adapted For Race Specific Frame Design - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 35T
$344.00
Eleven speeds to rule all the trails. That is the X1 Rear Derailleur's motto. It packs a massive amount of technology into its compact, lightweight aluminum body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
$334.00
SRAM's X01 Rear Derailleur packs a massive amount of technology into its compact, lightweight body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
$324.99
From top-tier XC racing to punishing enduro stages, Shimano defines the rear derailleur with their XTR Shadow Plus 11-speed model. The Shadow design is already well known and loved for its direct cable routing and low profile that greatly lessens the risk of snagging your cable on roots or tagging your derailleur on rocks. Shimano's Plus derailleur technology is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and noise is virtually eliminated and dropped chains are practically a thing of the past. And of course, it retains XTR's legendary smoothness, light action and super precise shifting. The medium-cage design matches perfectly with XTR's double and single ring cranks and 11-speed cassette, offering a crisp, defined gear range.
$312.00
Elevating the shift, expanding the capable, the X01 Eagle derailleur features an updated cage architecture to provide better chain management than ever. The X01 Eagle rear derailleur works with the new 10-52T cassettes and is backward-compatible with 10-50T options, as well. - Updated cage provides better chain retention and more precise shifts - Backward-compatible design works with 10-50T and 10-52T cassettes
$239.00
The EX1 derailleur capitalizes on the robust build and precise shifting attributes of the X-HORIZON design, to create the world’s first derailleur specifically made for E-MTBs. Engineered to handle high-torque, low-cadence shifting across the 11-48 tooth E-Block cassette, the EX1 derailleur gives E-MTB riders clean, confident shifts, so they can spend more time enjoying the ride. - Proven SRAM X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - The EX1 derailleur is purpose built for E-MTB - Speeds: 1 x 8-speed - Weight: 289 grams - Color: Black - Outer Cage: Aluminum - Inner Cage: Aluminum - Bearings: Steel - Cage Size: Medium - Max Tooth: 48
$235.00
SRAM's Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. These fine pulleys even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe container.
$235.00
SRAM's RED eTap Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. - Compatible with SRAM RED eTap derailleurs
$205.50
Paul Components Melvin Chain Tensioner. Converts frames for single speed use. Long enough for a Dingle-setup, (2 rings, one cog) 20T max. - The Melvin uses two pulleys, just like a rear derailleur, which gives it 20 teeth of chain wrap - Will work with multiple front chain rings while maintaining proper chain tension - The pulleys are made of extruded and machined aluminum and have sealed bearings for durability - Pulleys are 2.25mm thick at the tooth which fits inside most narrow 6 through 9 speed chains, and the pulley cage is wide enough to allow 1/8? single speed chains as well - Long enough for a Dingle-setup, (2 rings, one cog) 20T max - Do not use with a coaster brake or fixed gear - Includes Paul's own Sealed Bearing Pulleys
$199.99
Incredibly fast, astonishingly quiet, and impressively precise — fly through all 11 gears with SRAM's Force 22 WiFLi Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 WiFLi at a svelte 190 grams. The WiFli version shifts up to a 32T max cog for a super-wide gear range.
$199.99
The SRAM Rival 1 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, X-Horizon shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • X-Horizon design reduces shift force while eliminating ghost shifting and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings Aluminum cage • Technologies: X-Horizon, Exact Actuation, X-Sync, Roller Bearing Clutch, Cage Lock • Medium cage: 11-26 through 11-36 cassettes • Long cage: 10-42 cassette
$196.00
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts
$191.00
Leveraging the legendary history of SRAM shifting, the GX 2x11 rear derailleur provides incredible shifting speed and precision. X-Actuation technology eliminates slop and shifting variation while SRAM's roller bearing clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with SRAM's Cage Lock, wheel removal and installation are easier than ever. • X-Actuation for precise and dependable 11-speed performance • Focused chassis design for all conditions and usage • 10-42-tooth wide range cassette compatible
$164.99 - $179.00
SRAM's GX 1x11 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, this X-Horizon rear derailleur shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • Long cage • X-Horizon design reduces shift force, ghost shifting, and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings • Aluminum Cage
$178.99
The SRAM Rival 1 rear derailleur is engineered for smooth, reliable shifting action, delivering 100% of what you demand. By eliminating unwanted chain movement, X-HORIZON shifts faster, reducing shift effort and chain slap. - X-HORIZON design reduces shift force while eliminating ghost shifting and chain slap - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings and aluminum cage - Technologies: X-HORIZON, EXACT ACTUATION, X-SYNC, ROLLER BEARING CLUTCH, Cage Lock - Medium cage: 11-26 through 11-36 cassettes, 269g - Long cage: 10-42 cassette, 275 g
$168.00
This new NX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley easily facilitates 11- to 50- and 10- to 50-tooth cassette capacity, and also adds to NX Eagle's overall smooth-pedaling feel. The Type-3 ROLLER BEARING CLUTCH provides quiet, consistent performance and durability. - Eagle technology provides an expanded, optimum, gear range making you fast on the flats, giving you control on the climbs and unleashing your speed on the descents - Eagle is a complete drivetrain system that was developed to be an integrated high-performance ecosystem. The engineering and testing that went into the development provide for maximum performance, safety, and long-term durability to ensure a great consumer ride experience. We guarantee this performance when Eagle drivetrains are used as a complete ecosystem. For additional information, please contact your SRAM Sales Contact. - Completely new rear derailleur incorporating our proven X-HORIZON design and new Type-3 ROLLER BEARING CLUTCH technology - Eagle ecosystem-engineered mounting system and CAGE LOCK positioning add robustness - Eagle pulley technology provides greater efficiency, crisper shifting and quieter operation - Speed (RD): 12s - Cable pull ratio: X-actuation - Cage (RD): Long - Max tooth: 50 - Color (RD): Black - Pulley bearings material: Steel - Cage material (RD): Steel
$159.99
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience while delivering shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features an ON/OFF switch for the chain stabilizer. The RD-RX810 rear derailleur is compatible with road cassettes with a max cog size of 34T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Low cog: Max. 34T/Min. 30T - High cog: Max. 11T/Min. 11T - Total capacity: 40T - Compatible with current road Dual Control Lever - Maximum front chainring range: 17T
$159.99
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience with shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain stabilizer. The RD-RX812 rear derailleur is compatible with MTB cassettes with a max cog size of 42T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Smooth and reliable mixed-surface shifting - Compatible with current road Dual Control Levers - High cog: Max. 11T/Min. 11T - Low cog: Max. 42T/Min. 40T - Total capacity: 31T
$159.99
The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 1x12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount, 10x1 Standard - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 41 teeth - Largest Cog: 51 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain
$159.99
The Shimano Deore XT RD-M8100/M8120 rear derailleur is designed to provide smooth and stable shifting for 2 x 12-speed MTB drivetrains. - Offers fast and shockless shifting - The low-profile design includes a bumper added to the derailleur pulley cage - Shimano Shadow RD+ technology reduces chain slap and creates a quieter drivetrain - Includes large, 13T pulley - Long cage is designed to be used with 2 x 12 drivetrain systems - Rear Derailleur Mount Type: Shimano Rear Direct Mount - Drivetrain Speeds: 12 - Cage Length: Long - Chain Wrap Capacity (teeth): 45 teeth - Largest Cog: 45 - Weight: 284 g - Rear Der/Shifter Compatibility: Shimano Mountain
$134.99 - $149.99
Shimano Ultegra R8000 Shadow rear derailleur. - Sleek integrated appearance - Low-profile design - Race endurance - Optimized slant angle - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Model Number: RD-R8000 - Series: Ultegra - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Average Weight: 200 grams (short cage type), 210 grams (medium cage type)
$146.00
Incredibly fast, astonishingly quiet and impressively precise — fly through all 11 gears with SRAM's Force 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 at a svelte 178 grams.
$144.99
• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible
$144.99
- Alloy cage with adjustable chain stabilizer - Forged alloy links - 14t lower pulley and 12t upper pulley - Max rear sprocket is 50t with 1X setup; 42t with 2X - 10/11/12 speed compatible (Shimano 10/11 speed & SRAM 12 speed)
$114.99 - $139.99
Shimano's Deore Shadow+ Rear Derailleur is loaded with mountain bike technology. The Shadow design tucks the rear derailleur closer in to the wheel, reducing damage from rocks, roots, and trail obstacles. When it comes to gear changes, Shimano's Dyna-Sys supplies consistent, smooth shifting across the entire cassette. And the Shadow+ clutch maximizes chain control by virtually eliminating chain slap and excess noise with its integrated cage-tensioning clutch. - Medium Cage (for 2x10 drivetrains) - Long Cage (for 3x10 drivetrains) - For use with Shimano 10-speed drivetrains - High-efficiency drivetrain for aggressive trail riding - Optimized gear combinations and ratios for trail riding - Maximum chain wrap capacity: 41T (medium cage)/43T (long cage) - Largest cog: 42T (medium cage)/36T (long cage) - Compatible with wide range cassette - Silent and stable for technical trail riding - Improved stability and chain retention longevity - Light shifting effort - OPTISLICK cable - Smooth and precise shifting - DYNA-SYS compatible system
$139.99
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
$139.99
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
$134.99
Shimano's Ultegra Rear Derailleur delivers category-defining 11-speed shifting. At the heart of the derailleur is a light, tough, cold-forged-aluminum body with a wide, rigid pivot design that maximizes shifting speed and equalizes shift effort across the cassette. Smooth-spinning pulleys use sealed bearing to keep out the dirt and ensure quiet running in the miles to come.
$128.00
This new SX Eagle derailleur is your entry point to the SRAM Eagle Ecosystem. Sharing many features with the rest of the Eagle Ecosystem like the proven SRAM 1x-specific X-HORIZON body design, it can accommodate both 11-50T and 10-50T cassettes. The SX Eagle is cross compatible with much of the Eagle Ecosystem, making it easy to personalize and upgrade your ride when you are ready. - A full featured Eagle derailleur, compatible with the Eagle Colorsystem - X-SYNC pulley technology provides greater efficiency, crisper shifting, and quieter operation - Cage Lock offers discovery-level riders easy wheel removal - 50T max rear cog - Battery Not Included
$126.00
SRAM’s Apex 1 drivetrain provides the gear range and the shifting simplicity to let you simply go where you want. The Apex 1 rear derailleur makes that gearing choice a reality with clean, crisp shifts, thanks to SRAM’s X-Horizon geometry and their Roller Bearing Clutch. - X-Horizon design reduces shift force, eliminates ghost shifting and chain slap - Compatible with 10-speed and 11-speed SRAM 1x road systems - With Cage Lock technology, wheel removal and installation are easier than ever - Equipped with Roller Bearing Clutch - Large upper pulley offset automatically adjusts chain gap - Weight: 314 grams - Outer Cage: Steel - Compatibility: 10-speed and 11-speed SRAM 1x road systems - Inner Cage: Steel - Cage Size: Long - Max Tooth: 42t - Pulleys: Sealed cartridge bearings - Pull: Exact Actuation
$124.00
SRAM's XX1 Ceramic Bearing Rear Derailleur Pulleys run on super-smooth, efficient ceramic bearings so your drivetrain rolls with ease. They are lighter than conventional pulleys and even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe.
$114.99
The SLX M7100 series of derailleurs deliver advanced shifting performance with decreased tension in the low gear position and an added bumper on the pulley cage. Larger 13T pulleys increase efficiency and chain management while compatibility with Shimano's new 12-speed cassettes boosts range. - Advanced shifting performance provides the confidence to enjoy any trail - Fast and shockless shifting - Hyperglide+ - Extra wide range 12-speed drivetrain -10-51T (12-speed) - Silent drivetrain in all gear positions - Decreased rear derailleur and chain tension in low gear - New bumper added to rear derailleur pulley cage - Bump Stopper - Bigger 13T pulley - Stable drivetrain on rough terrain - Low-profile design - Shimano Shadow RD+
$109.99
- Rider Tuned For Sharp And Silky Shifts - 20% Light Shifting Operation - New Shadow Design With Optimized Slant Angle - Optislick New Shift Cable With New Hyper Low-Friction Coating Technology - Chain Stability Improved - New Shadow Design With Optimized Slant Angle For Stable Gear Position - Efficient Shifting And Smoother Driving - Efficient Pulley Teeth Design - Increased Traction Range For Long-Travel And Active Rear Suspension - Series : SLX: SLX - Maximum Sprocket : 42T(2x11-speed) or 46T(1x11-speed) - Minimum Sprocket : 11T: 34-38T - Front Difference : 10T: 48.8 - Total Capacity : 41T: 66-69 - Average Weight : 323g: 145.6g
Page 1 of 2 Next page