Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

3T Discus Plus Team C30 650B Front
$1,071.99
The Discus Plus C30 Team is 3T's carbon wheelset from the Discus Plus range of 27.5-inch wheels: Center Lock disc-brake hubs, 34mm wide, tubeless-ready rims, and 24F/24R spoking make this wheel ideal for new-wave adventure bikes. The Team wheels exploit carbon's lightweight properties to go to 28mm inner width. The Discus Plus build is similar to Discus, utilizing the 3T linear+ system with asymmetric rim drilling to reduce the difference in spoke tension between the drive side and non-drive side. Hubs have light, alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed.
3T Discus Plus Team C30 650B Rear
$1,392.99
The Discus Plus C30 Team is 3T's carbon wheelset from the Discus Plus range of 27.5-inch wheels: Center Lock disc-brake hubs, 34mm wide, tubeless-ready rims, and 24F/24R spoking make this wheel ideal for new-wave adventure bikes. The Team wheels exploit carbon's lightweight properties to go to 28mm inner width. The Discus Plus build is similar to Discus, utilizing the 3T linear+ system with asymmetric rim drilling to reduce the difference in spoke tension between the drive side and non-drive side. Hubs have light, alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed; rear width can run 135mm or 142mm.
3T Discus Plus Pro C25 650B Wheelset
$1,649.99
The Discus Plus is the world’s first wheel range specifically designed for wider tires on all-road/gravel bikes. The advantages are obvious: more grip, more comfort, almost unflattable (is that a word?) so you are practically unstoppable. Wide tires need a wide rim to prevent excessive lateral tire roll and improve cornering, so the Discus Plus Pro has a 24mm inner width (with full hooks), perfectly supporting both MTB and 650B tires. The Discus Plus build is similar to Discus, utilizing the 3T linear+ system. Asymmetric rim drilling reduces the difference in spoke tension between the drive side and non-drive side. And the hubs have light alloy oversize spindles with modular end-caps that can be easily swapped from quick-release to thru-axle as needed; rear width can run 135 mm or 142 mm.
49°N MTB/Urban 26-inch Nutted Front
$79.99
An affordable and classic-looking single-wall 26-inch wheel that uses MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to trekking, light MTB, and urban use. - Alex Rims Z1000 pinned construction single wall rim with 20mm internal width suitable for a wide range of tire widths & ground sidewall - Joytech alloy nutted hub w/serviceable cup and cone bearings - Straight gauge 14G/2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1068g
49°N MTB/Urban 29-Inch/700c Nutted Front
$82.99
An affordable and durable 29/700c rim brake wheelset with MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to a wide range of applications from MTB through to urban/commute/trekking. - Alex Rims Z1000 pinned construction single wall rim with generous 20mm internal width suitable for a wide range of tire widths & brushed sidewall - Joytech alloy nutted hubs w/serviceable cup and cone bearings - Plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1054g
49°N Road 26 x 1-3/8-inch Front
$82.99
An affordable wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 26 x 1-3/8(590mm ISO) wheel size. - Alex Rims X404 pinned construction classic box-section single-wall rim w/brushed sidewalls - Generous 20mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hub w/serviceable cup and cone bearings - Hub uses smaller diameter 5/16" axle for compatibility with the smaller fork slots on older Raleigh 3-speeds (compatible with standard 9mm dia. dropouts also) - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1109g
49°N Road 27-Inch Front
$82.99
An affordable wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 27-inch (630mm ISO) wheel size. - Compatible with both 27 x 1-1/4 and 27 x 1-3/8 tires (same ETRTO - 630mm) - Alex Rims AP18 pinned construction classic box-section single-wall rim brushed sidewalls a generous 18mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hubs w/serviceable cup and cone bearings - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1184g
49°N MTB/Urban 26-inch Freewheel/Nutted Rear
$93.99
An affordable and classic-looking single-wall 26-inch wheel that uses MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to trekking, light MTB, and urban use. - Alex Rims Z1000 pinned construction single wall rim with 20mm internal width suitable for a wide range of tire widths & ground sidewall - Joytech alloy nutted hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Straight gauge 14G/2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1068g
49°N Road 700c Freewheel/Nutted Rear
$93.99
An affordable, single-wall 700c classic-looking freewheel-compatible wheel with premium Stainless Steel spokes and a durable 36H construction. - Alex Rims AP18 pinned construction classic box-section single-wall rim brushed sidewalls a generous 18mm internal width for compatibility with a wide range of tire widths - Joytech nutted alloy hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (8/9/10sp compatible) — axle can be respaced for 5/6/7sp compatibility - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1237g
49°N Road 700c Front
$93.99 - $104.99
A durable & classic 32H 700c road wheel with a new-school 18mm internal width rim. - Lightweight (485g) pinned construction low-profile double wall rim w/CNC machined sidewalls, wear indicator, and anodized matte black finish - Joytech alloy QR hubs w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black or silver) / 12mm brass nipples (silver) - 32H/3X lacing - Presta drilling - QR levers & high-pressure rim tape included - Not tubeless compatible - Weight: 989g
49°N Road 26 x 1-3/8-inch Rear
$94.99
An affordable freewheel-compatible wheel with a durable 36H single wall construction and premium Stainless Steel spokes to fit older/classic road bikes built around the 26 x 1-3/8(590mm ISO) wheel size. - Alex Rims X404 pinned construction classic box-section single-wall rim w/brushed sidewalls - Generous 20mm internal width for compatibility with a wide range of tire widths - Joytech nutted steel hub w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (6/7sp compatible) (axle can be re-spaced for 5sp compatibility) - Straight gauge 2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1243g
49°N MTB/Urban 26-inch Front Wheel
$104.99
A tough, no-nonsense workhorse 26-inch rim brake wheel with MTB hub spacing that's perfectly suited to a wide range of applications from MTB through to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hub w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 944g
49°N MTB/Urban 29-inch/700c Rim & Disc Rear
$104.99
An affordable and clever dual-duty rim and disc brake compatible 29-inch/700c wheelset that combines MTB hub spacing with screw-on freewheel compatibility for a wheelset that's perfectly suited to trekking, MTB, and urban use. - Alex Rims Z1000 pinned construction single wall rim with 20mm internal width suitable for a wide range of tire widths and ground sidewall - Joytech 6-Bolt disc alloy nutted hubs with serviceable cup and cone bearings - Anodized brake track for clean looks when used with a disc brakes - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Straight gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) with 12mm brass nipples (silver) - Weight: 1244g
49°N 18-inch Rear Coaster
$114.99
Tough-yet-affordable single wall rear 18-inch (355mm ISO) coaster wheel that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires - Anodized brake track for clean looks when used with coaster only - KT 305R Nutted 110mm OLD steel coaster hubs w/serviceable cup and cone bearings - Compatible w/3-spline coaster hub sprockets, 16T included - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1213g
49°N MTB/Urban 29-inch/700c Rim Brake Rear
$114.99
A tough, no-nonsense workhorse 29/700c rim brake wheel with MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Not tubeless compatible - Weight: 1141g
49°N MTB/Urban 27.5 Rim Brake Rear
$129.99
A tough, no-nonsense workhorse 27.5-inch rim brake wheelset with MTB hub spacing that's perfectly suited to a wide range of applications from MTB to urban/commute/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hub w/serviceable cup and cone bearings - Shimano steel freehub body: 8/9/10/11sp MTB cassette compatibility - Reinforced head straight gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1228g
49°N Track 700c Front
$129.99
A durable 32H aero track wheel in stealth black finish with new-school 17mm internal width thats fast enough for the velodrome and tough enough for the streets. - Pinned construction double-wall rim w/aero 30mm deep profile, wear indicator, and anodized matte black finish - CNC sidewalls with post-anodized finish for clean brakeless all-black stealth looks - Joytech high flange nutted axle 100mm alloy nutted hub w/100% serviceable cup and cone bearings - Reinforced head plain gauge 2.0mm SUS304 Stainless Steel spokes w/12mm brass nipples - 32H/3X lacing - Presta Drilling - Axle nuts & high-pressure rim tape included - Weight: 1082g
49°N MTB 27.5-inch Boost Disc 6-Bolt/TA Front Wheel
$139.99
A tough, tubeless-compatible 27.5 disc wheelset in new-school boost thru-axle spacing - Pinned construction double wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hook-less construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer and more reliable wheel - Joytech Boost thru-axle alloy 6-Bolt hubs w/ serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - 32H/3X lacing - Presta drilling - High-pressure rim tape included (non-tubeless) - Tubeless compatible - Weight: 1076g
49°N MTB 29-inch Disc 6-Bolt/TA Front
$139.99
A tough, tubeless-compatible 29-inch disc wheel in traditional non-boost thru-axle spacing. - Pinned construction double-wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings - 6-Bolt disc compatible only - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1110g
49°N MTB/Urban 26-inch Disc Brake Rear
$149.99
A tough, tubeless-compatible 26-inch disc wheelset built around Center Lock hubs but shipped with handy 6-Bolt adapters for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 135mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Shimano freehub: 8/9/10/11sp MTB compatibility - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1132g
49°N MTB/Urban 29-inch/700c Disc Brake Rear
$149.99
A tough, tubeless-compatible 29/700c disc wheel built around Center Lock hubs and shipped with handy 6-Bolt adapters for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 135mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Shimano freehub: 8/9/10/11sp MTB compatibility - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1209g
49°N Track 700c Fixed/Free Rear
$149.99
A durable 32H aero track wheel in stealth black finish w/new-school 17mm internal width and flexible fixed/free rear compatibility that's fast enough for the velodrome and tough enough for the streets. - Pinned construction double wall rim w/aero 30mm deep profile, wear indicator, and anodized matte black finish - CNC sidewalls with post-anodized finish for clean brakeless all-black stealth looks - Joytech high flange nutted axle 120mm alloy nutted hubs w/100% serviceable cup and cone bearings - Fixed/free rear threads for compatibility with either 1.375" x 24TPI screw-on singlespeed freewheel or fixed sprocket & lockring (stepped 1.375" x 24TPI/1.29" x 24TPI) - Reinforced head plain gauge 2.0mm SUS304 Stainless Steel spokes w/12mm brass nipples - 32H/3X lacing - Presta Drilling - Axle nuts, 16T cog, high-pressure rim tape included - Weight: 1183g
49°N Road/Gravel/CX 650B Disc Front
$156.99
A thru-axle 650B disc wheelset with convenient dual Center Lock/6-Bolt disc and full 8/9/10/11sp compatibility that is perfectly suited to modern road, CX, or gravel applications. - A lightweight (450g), pinned construction double-wall rim with new-school 23mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless bead profile - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, more compliant, and more reliable wheel - Joytech thru-axle alloy Center Lock hubs w/serviceable cup and cone bearings - Ships with CL-to-6-Bolt adapter and lockring full dual Center Lock/6-Bolt compatibility - Reinforced head straight gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 904g
49°N MTB 27.5-inch Boost Disc 6-Bolt/TA Rear Wheel
$169.99
A tough, tubeless-compatible 27.5 disc wheelset in new-school boost thru-axle spacing. - Pinned construction double wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hook-less construction - Asymmetric rims w/ offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech Boost thru-axle alloy 6-Bolt hubs w/ serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - 32H/3X lacing - Presta drilling - high-pressure rim tape included (non-tubeless) - Tubeless compatible - Weight: Front - 1076g, Rear: 1177g
49°N MTB 27.5-inch Disc Brake 6-Bolt/TA Rear
$169.99
A tough, tubeless-compatible 27.5-inch disc wheelset in traditional non-boost thru-axle spacing. - Pinned construction double-wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1191g
49°N MTB 29-inch Boost Disc 6-Bolt/TA Rear
$169.99
A tough, tubeless-compatible 29-inch disc wheelset in new-school boost thru-axle spacing. - Pinned construction double-wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech Boost thru-axle alloy 6-Bolt hubs w/serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1230g
49°N Road/Gravel/CX 700c Disc Rear (CL & 6-Bolt/TA)
$184.99
A thru-axle 700c disc wheel with convenient dual Center Lock/6-Bolt disc and full 8/9/10/11sp compatibility that is perfectly suited to modern road, CX, or gravel applications. - A lightweight (470g), pinned construction double-wall rim with new-school 23mm internal width, tubeless compatibility, offset/asymmetrical construction, and hookless bead profile - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, more compliant, and more reliable wheel - Joytech thru-axle alloy Center Lock hubs w/serviceable cup and cone bearings - 11sp Shimano road steel freehub body w/1.85mm freehub spacer for full 8/9/10/11sp compatibility - Ships with CL-to-6-Bolt adapter and lockring full dual Center Lock/6-Bolt compatibility - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (black) - 32H/3X lacing - Presta drilling - High-pressure rim tape included (non-tubeless) - Tubeless Compatible - Weight: 1159g
49°N 20-inch BMX Sealed Bearing 9T Driver Rear
$186.99
Durable, stealth all-black BMX wheel spinning on premium sealed cartridge bearings throughout and with a sealed 9T driver. - Pinned construction double-wall rim with a generous 28mm internal width for an excellent pairing with tires up to 2.4 wide - 14mm Cr-Mo male axle rear (sealed bearings all-round) - Anodized black brake track for clean looks when used with brakeless setups - 9T sealed driver - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1289g
Campagnolo Zonda Disc Brake Wheelset
$1,047.00
Campagnolo Zonda Disc Wheels are a benchmark for all aluminum disc brake wheelsets. It features a completely redesigned structure specific to bicycles with disc brakes. The result is all-round improved reactivity, especially thanks to the asymmetrical rims and Mega G3 hubs on both wheels. This innovative solution provides a stable front wheel that is able to absorb energy from the braking torque generated on the left-hand side and a rear wheel that guarantees maximum power transfer from the cyclist. - Compatible with HH12, QR and 135 and 142 rear hubs. - 6 screws and AFS to ensure full compatibility with every disc available on the market. - The front wheel also features G3 technology for top performance even during very powerful braking.
Campagnolo Bora One 35 Clincher Wheelset
$3,193.00
Whether you're looking to take it to the limit on a climb or throw down in a sprint, Campagnolo's Bora One 35 wheels are where it's at. Their 35mm deep-dish carbon rims and aero spokes are exactly what you need to slice through the wind and move to the head of the pack. They're also feathery light to give you a boost when the road turns uphill. And, the aluminum hubs house USB hybrid ceramic bearings for a zippy ride. Plus, the Boras come with Campy's legendary quick-releases, too. - 35mm carbon rim means greatly reduced weight - Clincher version ensures easier bike maintenance and management - The rim has exactly the same structure as that of top-of-the-range wheels - The aluminum hubs and ceramic USB bearings ensure performance at a lower price - 35mm high rim gives this wheel good performance on long stretches on the flat where even the aerodynamic factor is important - All the Campagnolo knowhow in the field of carbon makes this wheel lightweight and perfect for longer steeper climbs - Number of spokes: 18 Front, 21 Rear - RDB – Rim Dynamic Balance - Bladed aerodynamic spokes - Stainless steel spokes - Ultralinear/DRSC geometry - Aluminum nipples - Weight: 1405 grams Included: - Special brake pad kit for carbon wheels (red compound): 40% better braking performance in wet conditions and 20% in dry. - New Quick Release wheels with a totally redesigned aerodynamic profile, lighter and with a shiny finish. - Valve extender
Page 1 of 10 Next page