Parts & Accessories

Fits between cage and frame and allows water bottle cage to twist sideways for easier bottle removal and replacement. Works with most Topeak water bottle cages. - Material: Engineering grade plastic - Size: 7.9 x 2.5 x 1.5 cm / 3.1” x 1” x 0.6” - Weight: 25 grams

Switch your TWIST Bottle from bike to bike with an extra TWIST Bike Base. Includes TWIST Bike Base and screws for mounting to standard braze-ons. Make sure to use the provided screws when attaching your Bike Base. Compatible with all TWIST Bottles. - Includes TWIST Bike Base and screws for mounting to standard braze-ons - Compatible with all TWIST Bottles

CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.

Dry your reservoir quickly with the CamelBak Reservoir Dryer.

Want to keep your reservoir fresh and clean? Then pick up CamelBak's Reservoir Dryer. This handy accessory inserts into most reservoirs and separates the walls for effective drying.

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

B-RAD Everywhere Base 2

B-RAD Everywhere Base 3

- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.

Alt-Position Cage Mounts provide an alternative way to raise or lower your water bottle cages when they are assembled on rear hydration devices for you to comfortably mount or dismount your bike. They also provide mounting location options for Topeak Ninja Bottle Cages and allow use of different Ninja bottle cage series combinations on smaller frames and tighter spaces. - Material: Aluminum - Compatibility: Topeak TRI-BackUp Elite series, Omni-BackUp Elite, Topeak Ninja bottle cage series - Size: 10.8 x 1.2 x 9cm / 4.3" x 0.5" x 3.5" - Weight: 25g / 0.88oz (1 pc w/ 4 bolts)

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.

Aqua Cell replacement parts kit for use with the Profile Design Aqua Cell hydration system. - Kit includes straw, extra mesh, bottle tops, and rubber bands

Storage strap kit for Profile Design's Rear Mount Carbon Water Bottle Cage - Compatible with standard 7mm saddle rails

The BO-6 is a premium bottle opener modeled after our iconic PW-4 pedal wrench, with two offset wrench openings for optimal mechanical advantage and a long vinyl-dipped handle for maximum leverage. Made in the USA from laser-cut 304 stainless steel for a lifetime of use.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

- 2-liter hydration pack - Removable tube - Bite valve with protective cap - Sealing ring for tube portal;attachment hooks - Thermal protection pocket

The Drinking Tube with a bite-valve is ideal for active outdoor activities to transform an Ortlieb Waterbag, Watersack, Waterbelt or PET bottle into a drinking system. The tube is 33.5 inches long with a screw cap included for the bite valve. ADDITIONAL FEATURES: - Valve inside the cap for pressure compensation inside the container - Mouthpiece can be taken apart for hygienic cleaning

Ortlieb O-Strap Adjustable Rubber Strap - 190mm - Black - Soft material keeps items secure and helps prevent scratching

Flexible option for fastening additional bottle holder or other accessories to the bike frame. Are the holes in your bike frame in the wrong place or already in use? Using the O-Strap Bottle Cage Mount, you can additionally attach bottle holders or other items of equipment wherever you want them. This practical accessory is suitable for tubes of up to 60 mm diameter, whether on the frame or other parts of your bike.

The Shower Valve can be put onto all Ortlieb water containers. Remove the dust cap, put on the shower valve, and open the tap. The contents of the Water Sack are enough for a pleasant shower. Can also be used as a garden shower or watering can. - Shower Valve for all Ortlieb Water Sacks, Water Bags and Water Belt from models 1999 on - The Shower Valve is placed under the small cover cap onto the threaded connector instead of the dust cap - Simple metering of throughput by turning the shower valve - Ideal combination with the black 10L Water Sack or Water Bag as solar shower (check the water temperature prior to use - water might be too hot resulting in burns) - Can be used for watering flowers or for washing dishes - For water transport: remove the shower cap, cover the valve with the dust cap and firmly close the valve

This metering valve valve cap fits Ortlieb water containers (up to model year 1999). Add a valve to an Ortlieb water container. Twist the valve to control the amount of water flow.

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

Lezyne's Flow Caddy is a lightweight, rigid container that fits into any Lezyne and most other bottle cages, and serves as universal storage for a patch kit, multi-tool, extra tube, or phone. The Flow Caddy features a large opening which provides quick and easy access to contents and a secure screw-top. The labeled organizer secures and organizes your gear.

Sleek water bottle shaped organizer that fits into standard bottle cages. Internal compartments, including one zippered, organize small cycling essentials—including tire repair, snacks, personal items and more. It features a soft, semi-rigid shell that’s durable and water resistant. A full zipper allows for a full 180° opening, providing easy access and better organization. Its all black design, with black logos, matches with all styles of bicycles.

The removable dirt cover for the TWIST bottle 450, 590, 750 and 800 for retrofitting, because water simply tastes better without mud.

Climbing, biking or hiking – a good water supply is essential. However, you don’t want to spend a lot of time preparing? The HERMETIC hydration bladder is filled with ease and closes immediately and securely. Thanks to the patented closure technology, easy handling is guaranteed, allowing you to start your sporting activity quickly and effortlessly. The hydration bladder has three wide-opening rows of magnets that seal automatically and hermetically – absolutely leakproof. The additional SNAP closure on the pocket flap can be operated with one hand and prevents unintentional opening of the hydration bladder in the backpack during activities. Additionally, the wide opening allows users to quickly and simply clean and empty the bag. The advantages in a nutshell - Hydration bladder with magnetic self-sealing closure - Maximum tightness thanks to patented technology - No manual locking, clicking or pushing Large opening for easy filling and cleaning - Available in 1.5L and 2.5L volume - BPA free and tasteless material (TPU) Scope of delivery: - HERMETIC hydration bladder 1.5L or 2.5L - Drinking tube

The revolutionary Fidlock Tube Clip is the next evolution of hydration bladder management. It provides an innovative magnetic and mechanically locking attachment method for hydration tubes on backpacks and hip packs. With its patented system, the Tube Clip combines function with minimalist design. Installation is simple: The magnetic mechanical fixture is attached to the backpack or hip pack strap, and the opposing piece to the hydration reservoir hose.

The TWIST bike base adapter is mounted underneath the TWIST bike base to the bottle braze-ons: Thanks to the slotted holes, the adapter allows the base to be moved an additional 26.5 mm both upwards and downwards. -Adapter for shifting the TWIST bike base -For mounting between bike frame and TWIST bike base on the bottle braze-ons -Gains additional 15 mm space in each direction -Dimensions: 105 x 15 x 6 mm (LxWxH) -Including four screws for mounting -Aluminium, black anodised

TWIST Bottle Connector for TWIST 450, 590, 600, and 750 Bottles. Not compatible with TWIST 800 or KEEGO Bottles. Easily attach your new connector by placing it in the Connector indent on your Bottle and locking it in with a coin. Replace your connector on your existing set or add to a Replacement Bottle. - Compatible with TWIST 450, 590, 600, and 750 Bottles - Not compatible with TWIST 800 or KEEGO Bottles - Compatible with all TWIST Bases: Bike Base, Tex-Base, and Uni-Base