Topeak's Joe Blow Max II quickly inflates tires with a durable steel barrel, a sturdy composite base, a tight-sealing TwinHead that fits Presta and Schrader valves and a padded handle. You'll also appreciate the easy-to-read gauge.
Half air compressor – Half pump. The JoeBlow Booster pump just made it easier to install tubeless tires. This pump has an integrated aluminum air chamber that stores an air charge of one liter, up to 160psi / 11 bar, to quickly fill your tire and ensure the proper installation on a tubeless rim, just like a shop compressor. Once you flip the selector from “Charge” to “Inflate” mode, air bypasses the chamber and flows directly into your tire like a standard pump. The top-mounted easy to read gauge, air release button and comfortable dual density polymer grip, combined with its extra-long hose and stable base makes mounting tubeless and standard tires a breeze! - Hose dock - Base: Steel - Handle: Oversize padded / Dual density polymer - Pressure Tuning: Air release button - Barrel: Anodized aluminum w/ large cylindrical aluminum chamber - Gauge: 160 psi / 11 bar - Top mount analog - Head: SmartHead DX3 w/ air release button & x-long hose - Weight: 2.9 kg / 6.4 lb - Size: 74 x 25 x 18.5 cm / 29.1” x 9.8” x 7.3”
The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included
Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Inflate your tires fast on the trail with the Millibar hand pump. Designed specifically for high-volume touring, mountain bike, plus size and fat bike tires, it’s easy to use and fits both Schrader and Presta valves. Swiftly inflate tires to a maximum 40psi using the 29mm, 104cc capacity barrel, getting you quickly back on the bike. - Extendable hose & head system - Protects valves & easy to use - Fits Schrader or Presta - Lever actuated head - Snap fit frame mount included - Length: 235mm - Capacity: 104cc - Pressure: 40psi / 2.8bar - Body: Aluminium - Head: Retractable
The Nanobar offers a winning combination of portability and power, delivering 120psi inflation from a 180mm body. The size of the Nanobar is reduced by integrating the handle and barrel in an ‘overhandle’ design and a retractable head that offers protection to the valve. - Extendable hose & head system - Protects valves & easy to use - Ultra compact & lightweight - Over-handle design - For high pressure tires - Length: 180mm - Capacity: 20cc - Pressure: 120psi / 8.3bar - Body: Aluminium - Head: Retractable
$34.99 - $39.99
High volume for big tires, high pressure for skinnies. Simple. The Airstick 2-stage is a durable aluminum pump with enough puff for mountain bike tires and enough pressure for road tubes too, thanks to the two-stage high pressure/high volume switch. - Presta head only - High Volume or High Pressure - Includes frame mount - 85 gr/ 3oz - 160 PSI, 11 Bar maximum
Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs
$24.99 - $29.99
- CNC alloy construction - Simple, proven spring loaded valve design - Presta & Schrader valve compatible - Accepts all threaded CO2 cartridges - 55 grams
The ultimate inflation solution for shop and home mechanics. - Ultra-stable (320mm x 235mm) polished aluminum with pedal pins - 620mm high polish 6063 T6 aluminum with chrome pump shaft - Red anodized aluminum Clampdown handle with Lockdown MTB grips - 132cm extra-long premium-quality hose - Headrush DLX dual-valve connector with alloy valve caps and bleed valve - Oversized 63mm precision 200psi gauge - Headrush DLX connector instantly fits Presta or Schrader valves - Customizable handle and grips - Precision bleed valve for tubeless tires
A premium lightweight and efficient high volume mini pump with T-handle, 120 psi pressure rating and serviceable in-line pressure gauge. CONSTRUCTION • 6063-T6 aluminum barrel with red anodized aluminum pump shaft and textured head and T-handle HEAD • CNC-machined alloy Quick-Flip universal connection adapts instantly to Presta, Schrader or Dunlop valves • Forged aluminum TipFlip lock-on thumb lever ADDED BENEFITS • Serviceable in-line pressure gauge • Textured ridges on head and T-handle means no-slip in wet, muddy or sweaty conditions • Mounting bracket and bolts included • Pressure Rating: 120 psi • Weight: 170 grams / 0.37 pounds • Length: 28cm / 11 inches
Premium twist-to-regulate CO2 inflator. CONSTRUCTION • Fibre composite CO2 head with CNC-machined alloy valve connector and mud plug HEAD • CNC-machined alloy valve connector threads easily onto Presta or Schrader valves ADDED BENEFITS • Twist-to-regulate CO2 • Includes 16g CO2 cartridge • Compatible with standard threaded CO2 cartridges • Pressure Rating: cartridge dependent • Weight: 21 grams / 0.05 pounds • Length: 3.5cm / 1.4 inches
Efficient, high performance mini-hose pump with a serviceable alloy gauge CONSTRUCTION • CNC-machined lightweight aluminum with red anodized pump shaft, nonslip/ machine-textured grips and red anodized air-intake valve HEAD • CNC-machined alloy Quick-Flip universal connection adapts instantly to Presta, Schrader or Dunlop valves • Lever-actuated lock attaches instantly, and will not loosen valve cores ADDED BENEFIT • In-line aluminum pressure gauge • Non-slip texture means no-slip in wet, muddy or sweaty conditions • Mounting bracket and bolts included • Pressure Rating: 120 psi • Weight: 172 grams / 0.38 pounds • Length: 26.7cm / 10.5 inches
A dual-purpose suspension fork/rear shock pump with a unique dual-pressure gauge design to facilitate fine-tuning of the unique air pressure requirements for each shock. Eliminates the need for 2 shock pumps. - Lightweight 6063-T6 aluminum construction. - Dual-face gauge ensures accurate pressure for rear (300 psi) or front (110 PSI) shocks. - Accurate to +/- 2 PSI. - No-loss thread on valve ensure accurate pressure remains in shock when removed. - Double-braided extended hose, for repeated use, and long-term durability. - Bleed valve for fine-tuning pressure. - 383mm total length. - 194g
$16.99 - $23.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
For riders that like to travel light and fast, Topeak's AirBooster CO2 Inflator is an ideal tool. The AirBooster accepts all threaded cartridges and the head allows for Schrader and Presta valves.
Topeak's AirBooster Race Pod is a compact and completely self-contained tire inflation kit featuring an AirBooster CO2 inflator, two tire levers, two 16g CO2 cartridges, and a mounting module with strap and neoprene bag. The unique mounting module straps to the seatpost, seat tube, and provides lightning fast access to the AirBooster inflator, extra CO2 cartridge, and tire levers. The Airbooster Race Pod is the perfect CO2 tire repair solution for racing or endurance events.
Topeak's CO2-Bra CO2 Inflator gives you speed and convenience when it's time to fix a flat. A flip-up thumb lever puts precise flow control in your hands while the ergonomic handle gives you a better grip while inflating. An integrated safety ring prevents accidental cartridge puncture during storage. The CO2-Bra accepts threaded 16g cartridges and works with both Schrader and Presta valves.
Topeak's CO2-Bra Race Pod keeps all of your flat repair tools organized and easily accessible. The minimalist holder easily mounts to a seatpost or seat tube and its low weight won't weigh you down on the climbs. The whole package includes Topeak's easy to use CO2-Bra inflator with visual indicator, two CO2 cartridges, two tire levers, and the holder.
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak makes it easy to air up your tires with the HybridRocket MT pump. This innovative little ride-saver is a CO2 inflator on one side and a standard pump on the other. It also boasts aluminum construction for superb durability and max pump power, hitting 90psi. The HybridRocket's extendable hose with SmartHead fits both Presta and Schrader valves and lets you pump from a more comfortable angle, lessening chances of valve breakage.
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
The JoeBlow Pro DX’s new design brings form and function together for great performance in a floor pump. The aero-shaped aluminum barrel and wide base provide stability when pumping and the 3” top mounted analog gauge is easy to read up to 160 psi (11 bar). The large padded handles provide comfort while the extra-long hose can even reach wheels on bikes mounted in a stand. The new SmartHead with lower profile air release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task. - Head: SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 200 psi / 14 bar - 3” top mount analog - Base: Aluminum / Rubber - Barrel: Polished aluminum - Handle: Oversize dual tone - Added Features: Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 74 x 28 x 14 cm / 29.1” x 11” x 5.5” - Weight: 1.8 kg / 3.97 lb
Air up your bike tires in a hurry with Topeak's JoeBlow Race Floor Pump. Its steel barrel, sturdy composite base and oversize padded handle make inflating high volume tires an easy task. For versatility, its easy SmartHead pump head tightly grips both Presta and Schrader valves, and the air release button lets you quickly fine-tune your pressure. You'll also appreciate the easy-to-read top-mount gauge and the extra-long hose.
Topeak's Joe Blow Sport II quickly inflates tires thanks to its durable steel barrel and base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves as well as an oversized, padded handle. Plus, the easy-to-read gauge lets you dial in the perfect pressure every time!
Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!
Topeak's Joe Blow Turbo quickly inflates tires thanks to its durable aluminum barrel, sturdy aluminum base, a SmartHead that's compatible with both Presta and Schrader valves and a comfy, padded handle. You'll also appreciate the easy-to-read gauge.
Topeak’s TwinTurbo technology is a new concept for floor pumps that will save up to 50% of your time and effort. For over 25 years, Topeak engineers have had one dream in mind. Create the ultimate floor pump. It must have high pressure air output and massive volume delivery to fill both road and MTB tires easily and efficiently. TwinTurbo technology utilizes the pull and push of every stroke by transferring air between its two barrels. Pulling the handle up moves a massive amount of air volume from the larger barrel into the smaller barrel. Pushing the handle down compresses the air in the smaller barrel into high pressure output that fills road tires with high pressure, or MTB tires with large volume. No matter the type of tire, the JoeBlow Twin Turbo will literally blow you away. - Head: SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 200 psi / 14 bar - 3” Top mount analog - Base: Aluminum / Rubber pad - Barrel: Anodized aluminum - Handle: Oversize padded - Added Features: Dunlop valve adapter Ball / Bladder heads Hose dock - Size: 72 x 28 x 21 cm / 28.3” x 11” x 8.3” - Weight: 3 kg / 6.61 lb
Page 1 of 9 Next page