Pedals

- 90mm x 90mm Small Platform - Cro-Mo Axle - 6 rear loading, replaceable steel pins - Gripper profile for enhanced pedal traction - Fully sealed and lightweight DU bushing design - Pedal Weight: 310g

The Vision Light Kit is the solution to take your Geo Trekking or Geo Trekking Roc Pedals into the night. Ride with increased safety and visibility in traffic when the sun goes down thanks to the 3 different flash modes, an autonomy of over 30 hours, and the oscillating light beam created by the constant rotation of the pedals. The convenient clip system makes the kit quick and easy to install. As the Vision Light is independent from the pedal, it can be easily recharged via a simple USB cable.

- Classic BMX-style platform pedal for all-around use across varied disciplines - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 22.5mm height/105mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 405g

Designed for occasional, leisure and new riders, Look's Keo Sprint pedals are reliable, efficient, and extremely durable. Built with spring technology, it is possible to adjust the tension between 8 and 12 for a safe entry/release. To increase its durability, the platform surface is reinforced with a stainless-steel plate that gives it exceptional longevity. - Composite body - Cr-Mo Axle - Large contact area, 210mm - Cleats included - 141 grams per pedal - Adjustable tension - Pedals Thread 9/16-inch - Cleat Compatibility: Keo

- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 15mm height/100mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 345g

Look's S-Track Enduro Cage increase the surface area of Look's S-Track pedals, making them perfect for enduro and all-mountain riders, off-road touring fans, or anyone who rides clipped in but appreciates the stability of a platform. Constructed from lightweight aluminum, they give you a wide, anti-slip platform to keep your feet on the pedals even when you're not clipped in. - Adaptable to all of the S-Track range (sold separately) - 60g

X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Multidirectional - Clip in: 30% easier - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g

The EXPLORER PD-ES600 pedals are designed for rides requiring frequent engagement and disengagement, such as city touring. Light action springs allow for easy entry and exit, making the new rider feel more confident. CLEAN APPEARANCE - The PD-ES600 features a clean appearance body for use on lightweight road touring bikes. EASY RIDER ADJUSTMENT - Easy-to-adjust entry and release tension settings. SYSTEM ENGINEERED TO WORK TOGETHER - SHIMANO RT footwear is designed to match the PD-ES600.

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

- Developed for the demands of professional Enduro racing, the SPECIALE 12 is made of a 6106-T6 aluminum - A wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system combine to exceed the demands of the most advanced riders. - TIME's renowned engagement system allows easy engagement with a positive, predictable entry and release, as well as a design that self-cleans even in the most difficult conditions.

- All of the technologies from the rest of XPRESSO line at an affordable price. - The large platform, low stack height, and adjustable carbon blade tension make this a great pedal for all cyclists looking for pedaling comfort and efficiency without a high cost. - If you're new to clipless pedals or have ever struggled to clip into your pedals, you'll love the ICLIC system, which features a pre-opened design that makes clipping in extremely easy. Specs: - Pedal Material: Composite - Pedal Weight: 115g - Cleat Compatibility: ICLIC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

- Pedal Cover Cap Left/Right Top replacement TIME XPro

- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents. - TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast. - The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud. Specs: - Pedal Material: Aluminum - Pedal Weight: 238g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

Whether gunning for the podium or just wanting to finish strong, the Speedplay Aero road pedal is aerodynamically engineered to defy wind and boost speed with less effort. The unique 3-axis adjustability allows you to dial in your cleat positioning, micro-adjust your float up to 15 degrees, and decrease your stack height for the most aerodynamic fit on your bike. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. By integrating Speedplay's advanced pedal platform into Aero's streamlined design, a pedal profile is created that minimizes drag, helping you achieve faster finishes and shattered PRs. - Weight: 224g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 39º - Bearing: Sealed

- Compatible with all Shimano SPD type pedals - SPD cleat design to be assembled on LOOK style shoes

Designed and manufactured by PEMBREE in the UK with the strictest environmental standards, the PEMBREE the D2A pedal is totally carbon neutral. PEMBREE components are hand-crafted and fully made in England. All components, from the aluminium all the way to the bearings, are sustainably sourced and easily recyclable. PEMBREE D2A is designed as the ultimate racer's flat pedal. Balancing perfectly between traction, strength and weight. Riders of the D2A benefit from unrivaled grip via PEMBREE designed and manufactured Traction Pins, the strength of a stainless-steel spindle and premium bearings. - Spindle: Stainless Steel - Pedal Body: Aluminium - Traction Pins: Stainless Steel - End Cap: Aluminium - Inner Bearings: IGUS JSM - Outer Bearings: Sealed Ball Bearings - Pins: 10 Traction Pins per side - Body Dimensions: 100mm x 110mm x 15mm (centre) - Weight: 446g - Warranty: 5 years, 2 years bearings

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here! After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market. From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal. - Weight: 379g - Platform material: 7075 Alloy - Profile: 15mm - Platform: 100mm x 102mm - Dish: 2mm (concave) - Pin material: Stainless steel - Pin width: 3.5mm - Pin height: 4.5mm - Axle Material: EN24T Steel - Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

The Bladerunner is a perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability. The Bladerunner thrives in the most technically challenging conditions possible. When ground clearance is a priorit you will be hard pressed to find a pedal more suitable for rocky terrain.

Spare Pedal Pins for the Composite MK4 Pedals. Keep maximum traction on your pedals with new Pedal Pins. - 32 Pedal Pins - Enough for a pair of pedals - Used for MK4 Composite Pedals only

What if you could take control of gravity? Lean into the bend as far as possible without losing contact with the trail, or fly over doubles with ease? Designed alongside our top athletes to push the limits of grip and control, our TRAIL ROC PLUS flat pedals feature a wide, concave forged aluminum platform and high-resistance axles for perfect stability and unparalleled toughness. With 10 adjustable aluminum pins and a 16mm profile height, they keep you glued to your bike through curves, jumps and technical sections. Make every run a new challenge!

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Crank Brothers' Quattro 3-hole cleats let you use Crank Bros. pedals with your road shoes. The cleat and walking plate mount directly to shoes that use a traditional 3-hole mounting setup. - Weight (pair): 86 grams - Shoe compatibility: LOOK/SPD-SL - Release angle: 15 or 20 degrees

Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel

The super popular Impulse Pedals feature 12 traction pins per side and a knurled, concave body for superior grip. Keep your bike looking fresh and swaggy! Product Specifications - Size: 9/16" - Body: Nylon Composite - Spindle: Chromoly Steel - Installation: 15mm Pedal Wrench or 6mm Allen Key - Pins: 12 molded traction pins per side - Weight: 14.2oz

IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer

- Dial your fit with Spoon flat pedals available to fit from kid's sizes - 90mm = US shoe sizes 6 & under / 100mm = US shoe sizes 7~10 / 110mm = US shoe sizes 11+ - Forged chromoly axle which delivers strength and durability - 16mm-12mm concave profile with 20 preassembled steel pins for added grip - Shot-peened and anodized to enhance fatigue life - Recommended for: ASTM 5, All mountain, Trail, Enduro, free ride, DH, E-Bike, KIDS (90x105) - PLATFORM SIZE (mm): 90x105 - PLATFORM PROFILE (mm): 16—12 concave profile - WEIGHT +/- (g): 360 / 400 / 420 per set - AXLE: cold forged chromoly steel - BEARING/BUSHING: industrial sealed bearing, IGUS bushing - PINS: 20 steel pins (per pedal) - TECHNOLOGIES: Chamfered leading edges - MATERIAL: MGR extruded alloy body, CNC optimized

- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)